Automatic Cube Sugar Production Plant

>>SUGAR
Granulated sugar is poured into bouncer.
It is carried to the upper bouncer by means of helix.
It flows from the upper bouncer into the mixer.
Water is injected into the mixer together with sugar.
The sugar mixed with water in the mixer is poured in the mould feeder.
Filling is made into the moulds by means of the filling fingers in the mould feeder.
Weight volumetric adjustment in grams is applied to the sugar filled in the moulds.
The excessive weight of the sugar adjusted in grams is taken by the scraper plate.
The sugar adjusted by weight in grams is ready for the press.
It is pressed by being compressed between the press cam and the press plate.
The pressed sugar is put on the wire band.
After the cube sugar is put on the band, the moulds are cleaned by the brush bowl and brush.
This process keeps on throughout the period that the machine operates synchronously.

>>DRYING TUNNEL
While the cube sugar poured on the band is advancing towards the end of the band, the rate of its humidity is reduced by means of the infrared resistances.Drying is provided.The dried sugar goes through the cooling cabin, its temperature drops, and it rests.

>>FILLING ROBOT
The sugar coming from the band is stopped by the sugar stopping ruler and corrected by the side collecting ruler, the sugar that is corrected by the robot receiver is vacuumed and conveyed to be packed.The cube sugar is put into the packaging as in two layers and three layers by means of openers of the package.When the robot is laid the third layer, the openers come out of the package.While the robot is going again to take the first layer, the filled box feeding piston discharges the filled box, the empty box feeding piston pushes the empty box under the openers.The openers open the package again.The robot sends the box that it had filled, to the box closing.

>>MAKING BOXES
BSM - KY Type of box making machines are full automatic machines taking the printed and cut cartoons from the magazine by vacuum and formed them in the mould and make boxes and convey them to the empty box conveyor.The Capacity:18000 boxes/day.

>>CLOSING BOXES
The box that is filled at BSM-KM Robot is conveyed to the box closing machine by the box stopping piston synchronously.The ears of the box coming to the closing section are folded, their lids are laid, glue is applied and the lid is locked.Capacity:30000 boxes/day.